Expert of Micro-Motors
News
-
Discussion on the stroke of 10 mm linear stepping motor
20mm through shaft linear stepping motor The length of the screw rod is 76, the length of the motor is 22, and the stroke is about the length of the screw rod - the...Read more -
Robot commonly used micro-motor analysis and differences
This article mainly discusses DC motors, geared motors, and stepper motors, and servo motors refer to DC micro motors, which we usually come across mostly. This article is only for beginners to talk about the various motors commonly used to make robots. A motor, common...Read more -
Three drying methods for DC gear motor after moisture
DC motor in the production process, it is often found that some geared motor placed for a period of time not used, and again when the geared motor winding insulation resistance is found to be reduced, especially in the rainy season, the air humidity, the insulation value...Read more -
Micro geared motor noise analysis and installation considerations
Micro geared motor noise analysis How is the noise of the micro geared motor generated? How to reduce or prevent the noise in daily work, and how to solve this problem? Vic-tech motors explain this problem in detail: 1. Gear precision: Is the gear precision and fit OK?...Read more -
Motor shaft analysis of miniature reduction gearbox
Micro geared motor consists of motor and gearbox, motor is the power source, motor speed is very high, torque is very small, motor rotational motion is transmitted to the gearbox through the motor teeth (including worm) mounted on the motor shaft, so the motor shaft is o...Read more -
Miniature stepper motor technology provides the ideal solution for electronic locks!
With public health and safety a top priority in our daily lives, automatic door locks are becoming increasingly popular, and these locks need to have sophisticated motion control. Miniature precision stepper motors are the ideal solution for this compact, sophisticated d...Read more -
How do stepper motors decelerate?
Stepper motor is an electromechanical device that directly converts electrical pulses into mechanical motion. By controlling the sequence, frequency and number of electrical pulses applied to the motor coil, the stepper motor's steering, speed and rotation angle can be c...Read more -
Stepper motor failure in different modes of operation and handling
①Depending on the type of motion profile, the analysis is different.Start-Stop operation: In this operation mode, the motor is hooked up to the load and and operates at constant speed.The motor has to accelerate the load (overcome inertiaand friction) within the first st...Read more -
Stepper motor heating cause analysis
After the stepper motor starts there will be an inhibition of the rotation of the role of the working current, like the elevator hovering in mid-air state, it is this current, will cause the motor to heat up, this is a normal phenomenon. ...Read more -
About the speed calculation of geared stepper motor
Principle. The speed of a stepper motor is controlled with a driver, and the signal generator in the controller generates a pulse signal. By controlling the frequency of the pulse signal sent, when the motor moves one step after receiving a pulse signal (we only consider...Read more -
Principle and advantages of Non-captive linear stepper motors
Stepper motor is an open-loop control motor that converts electrical pulse signals into angular or linear displacements, and is the main actuating element in modern digital program control systems, which is widely used. The number of pulses can be controlled to control t...Read more -
The application of stepper motors will encounter nine major problems
1, how to control the direction of rotation of the stepper motor? You can change the direction level signal of the control system. You can adjust the wiring of the motor to change the direction, as follows: For two-phase motors, just one of the phases of the motor line e...Read more
Send your message to us:
Write your message here and send it to us.